ITW Industry - Timber to masonry / steel connection form

Timber to masonry / steel connection form

All fields marked with a red asterisk (*) must be completed.

Your Contact Details

*Name:

*Position:

*Company:

Address:

*Telephone:

Fax:

*Email:

Cullen Branch:

Glenrothes
Southern

Northern
Ireland

Please provide us with the following specifications

Date Hangers are Required on Site:

Quantity of Hangers Required:

Hanger width requirement (W):

mm

Hanger depth requirement (H):

mm

Return (R):

mm

Minimum bearing size (B):

mm

Safe working load:

Medium Term kN - Long Term kN

Uplift:

kN

Incoming Member

Incoming beam material:

LSL	Glulam	Timber (grade: )
LVL	I-Joist	Open web

If I-Joist/Open Web, specify System used:

Width:

mm

Depth:

mm

Number of Plies:

Masonry Support

Supporting masonry :

2.8N/mm² 3.5N/mm²
7.0N/mm² Padstone

Is there 675mm masonry above? :

Yes No

Steel Support

Attached to steel beam? :

Yes No

Is hanger flush with the top or the bottom of the steel beam?:

Top Bottom

Steel Beam mass per metre :

x x

Skewed/Sloped Angle

Skewed Angle Required:

Degrees

Left Hand or Right Hand or Both:

The example shown is 45° L/H orientation

L R
Both

Sloped Angle Required:

Degrees

Direction of the Slope:

Up Down Both

Any Other Comments i.e. Return required

You can also download the template as a pdf or word document and fax it back to 01592 771182

Share This